MSA-2811: A Zigbee dongle of Smartplus system to connect blinds and shades. the device is using Zigbee Home Automotion 1.2.

devicetypes/smartplus/rollershade.src/rollershade.groovy

@@ -0,0 +1,175 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */a
+metadata {
+    definition (name: "RollerShade", namespace: "smartplus", author: "jianfu") {
+        capability "Configuration"
+        capability "Actuator"
+        capability "Refresh"
+        
+        command "upOpen"
+        command "downClose"
+        command "stop"
+        command "refresh"
+        command "gotoPercent", ["number"]
+		command "microOpen"
+        command "microClose"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0102", manufacturer: "Smartplus", model:"DongleZD", deviceJoinName:"Smartplus's DongleZD"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0102", manufacturer: "Smartplus", model:"DongleZR", deviceJoinName:"Smartplus's DongleZR"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0102", manufacturer: "Smartplus", model:"M2810EIR", deviceJoinName:"Smartplus's M2810EIR"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0102", manufacturer: "Smartplus", model:"M2810EIRB", deviceJoinName:"Smartplus's M2810EIRB"        
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0102", manufacturer: "Smartplus"
+        
+    }
+
+    tiles(scale: 2) {
+        multiAttributeTile(name:"Generic", type: "generic", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("printPercent", key: "PRIMARY_CONTROL") {
+                attributeState "default", label:'${currentValue}%', backgroundColor:"#00A0DC"
+            }
+            tileAttribute ("destPercent", key: "SLIDER_CONTROL", ) {
+                attributeState "default", action:"gotoPercent", defaultState: true
+            }
+        }
+        standardTile("upOpen", "None", width: 2, height: 2, decoration: "flat") {
+            state "default", label: 'Open', action: "upOpen",icon: "http://47.89.178.62:8080/ShengTuRui/smartthings/up.png",  backgroundColor: "#00a0dc"
+        }
+        
+        standardTile("stop", "None", width: 2, height: 2, decoration: "flat") {
+            state "default", label: 'Stop', action: "stop",icon: "http://47.89.178.62:8080/ShengTuRui/smartthings/stop.png",   backgroundColor: "#00a0dc"
+        }
+        
+        standardTile("downClose", "None", width: 2, height: 2, decoration: "flat") {
+            state "default", label: 'Close', action: "downClose", icon: "http://47.89.178.62:8080/ShengTuRui/smartthings/down.png", backgroundColor: "#00a0dc"
+        }
+        //controlTile("destPercent", "destPercent", "slider", decoration: "flat", height: 1, width: 6, inactiveLabel: false) {
+		//	state "destPercent", action:"gotoPercent"
+		//}
+        standardTile("microClose", "None", width: 2, height: 2, decoration: "flat") {
+            state "default", label: '<<<', action: "microClose", icon: "http://47.89.178.62:8080/ShengTuRui/smartthings/down.png",  backgroundColor: "#00a0dc"
+        }
+        
+           standardTile("microClose1", "None", width: 2, height: 2, decoration: "flat") {
+            state "default", label: '', action: "microClose"
+        }
+        //standardTile("microStep", "None", width: 2, height: 1, decoration: "flat") {
+        //    state "default", label: ''
+        //}
+        standardTile("microOpen", "None", width: 2, height: 2, decoration: "flat") {
+            state "default", label: '>>>', action: "microOpen",  icon: "http://47.89.178.62:8080/ShengTuRui/smartthings/up.png", backgroundColor: "#00a0dc"
+        }
+        main "Generic"
+        details(["Generic", "downClose", ,"stop", "upOpen", "destPercent", "microClose", "microStep","microClose1", "microOpen"])
+    }
+}
+
+
+
+/**************************************************************************************************************************/
+// Parse incoming device messages to generate events
+def toHex(value, width){
+	def table = ["0","1","2","3","4","5","6","7","8","9","A","B","C","D","E","F"]
+    if (width == 2){
+    	def valueH = value.intdiv(256)
+        def valueL = value % 256
+        return table[valueL.intdiv(16)] + table[valueL % 16] + table[valueH.intdiv(16)] + table[valueH % 16]
+    }
+    else{
+    	return table[value.intdiv(16)] + table[value % 16]
+    }
+}
+def toInt(string){
+	def value = []
+	def table = "0123456789ABCDEF"
+    string = string.toUpperCase()
+    for(int i=0; i<string.length(); i+=2){
+    	def vh = table.indexOf(string.getAt(i))
+        def vl = table.indexOf(string.getAt(i+1))
+        value.add(vh*16+vl)
+    }
+    if(value.size == 1){
+    	return value[0]
+    } else if(value.size == 2){
+        return value[1]*256+value[0]
+	}
+}
+def parse(String description) {
+    //log.debug "description is $description"
+    def event = zigbee.getEvent(description)    
+    if (event) {
+    } else {
+        def descMap = zigbee.parseDescriptionAsMap(description)
+        //log.debug "${descMap}"
+        if( descMap.clusterId == "0102" && descMap.command == "0B" && descMap.isClusterSpecific == false){
+        	if (descMap.data[0] == "00"){
+            	log.debug "Send command: Open Successed"
+            }
+            else if (descMap.data[0] == "01"){
+            	log.debug "Send command: Close Successed"
+            }
+            else if (descMap.data[0] == "02"){
+            	log.debug "Send command: Stop Successed"
+            }
+            else if (descMap.data[0] == "05"){
+            	log.debug "Send command: gotoPercent Successed"
+            }
+	    }else if(descMap.cluster == "0102" && descMap.attrId == "0008" && descMap.isValidForDataType == true){
+        	def val = toInt(descMap.value)
+            log.debug "currPercent: ${val}%"
+            sendEvent(name:"destPercent", value:val)
+        	//sendEvent(name:"printPercent", value:val)
+            if(descMap.additionalAttrs[0].attrId == "f004"){
+            	val = toInt(descMap.additionalAttrs[0].value)
+                log.debug "destPercent: ${val}%"
+                sendEvent(name:"printPercent", value:val)
+        		//sendEvent(name:"destPercent", value:val)
+            }
+        }
+    }
+}
+//Rollershade commands
+def upOpen(){
+	log.debug "Send command: Open"
+	zigbee.command(0x0102, 0x00)
+}
+def downClose(){
+	log.debug "Send command: Close"
+	zigbee.command(0x0102, 0x01)
+}
+def microOpen(){
+	log.debug "Send command: microOpen"
+	zigbee.command(0x0102, 0x87, "040000")
+}
+def microClose(){
+	log.debug "Send command: microClose"
+	zigbee.command(0x0102, 0x87, "050000")
+}
+def stop(){
+	log.debug "Send command: Stop"
+	zigbee.command(0x0102, 0x02)
+}
+def gotoPercent(percent){
+	log.debug "Send command: gotoPercent(${percent})"
+	zigbee.command(0x0102, 0x05, toHex(percent, 1))
+}
+def installed() {
+	log.debug "installed."
+}
+def refresh() {
+	log.debug "Refresh attribute(CurrentPercent)"
+	zigbee.readAttribute(0x0102, 0x0008)
+}
+def configure() {
+    log.debug "Configuring Reporting and Bindings."
+    zigbee.configureReporting(0x0102, 0x0008, 0x20, 1, 60, 0x01)+zigbee.configureReporting(0x0102, 0xf004, 0x20, 1, 60, 0x01)
+}