Compare commits
1 Commits
user139147
...
MSA-2549-1
| Author | SHA1 | Date | |
|---|---|---|---|
|
799e659256 |
@@ -0,0 +1,440 @@
|
||||
/**
|
||||
*
|
||||
* Fibaro FGS-222 Double Relay Switch Device Type
|
||||
*
|
||||
* Author: Robin Winbourne
|
||||
* Date: 2017-01-18
|
||||
*/
|
||||
|
||||
metadata {
|
||||
definition (name: "Fibaro FGS-222 Double Relay Switch", namespace: "smartthings", author: "Robin Winbourne") {
|
||||
capability "Switch"
|
||||
capability "Relay Switch"
|
||||
capability "Polling"
|
||||
capability "Configuration"
|
||||
capability "Refresh"
|
||||
capability "Zw Multichannel"
|
||||
|
||||
attribute "switch1", "string"
|
||||
attribute "switch2", "string"
|
||||
|
||||
command "on1"
|
||||
command "off1"
|
||||
command "on2"
|
||||
command "off2"
|
||||
|
||||
fingerprint deviceId: "0x1001", inClusters:"0x86, 0x72, 0x85, 0x60, 0x8E, 0x25, 0x20, 0x70, 0x27"
|
||||
|
||||
}
|
||||
|
||||
simulator {
|
||||
status "on": "command: 2003, payload: FF"
|
||||
status "off": "command: 2003, payload: 00"
|
||||
|
||||
// reply messages
|
||||
reply "2001FF,delay 100,2502": "command: 2503, payload: FF"
|
||||
reply "200100,delay 100,2502": "command: 2503, payload: 00"
|
||||
}
|
||||
|
||||
tiles(scale: 2){
|
||||
|
||||
multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
|
||||
tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
|
||||
attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
|
||||
attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
|
||||
}
|
||||
}
|
||||
standardTile("switch1", "device.switch1",canChangeIcon: true, width: 3, height: 3) {
|
||||
state "on", label: "switch1", action: "off1", icon: "st.switches.switch.on", backgroundColor: "#79b821"
|
||||
state "off", label: "switch1", action: "on1", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
|
||||
}
|
||||
standardTile("switch2", "device.switch2",canChangeIcon: true, width: 3, height: 3) {
|
||||
state "on", label: "switch2", action: "off2", icon: "st.switches.switch.on", backgroundColor: "#79b821"
|
||||
state "off", label: "switch2", action: "on2", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
|
||||
}
|
||||
standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
|
||||
state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
|
||||
}
|
||||
|
||||
standardTile("configure", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
|
||||
state "default", label:"", action:"configure", icon:"st.secondary.configure"
|
||||
}
|
||||
|
||||
main(["switch","switch1", "switch2"])
|
||||
details(["switch","switch1","switch2","refresh","configure"])
|
||||
}
|
||||
|
||||
|
||||
preferences {
|
||||
def paragraph = "Device Handler by @RobinWinbourne"
|
||||
input name: "param1", type: "number", range: "0..255", defaultValue: "255", required: true,
|
||||
title: paragraph + "\n\n" +
|
||||
"Parameter Settings: \n\n" +
|
||||
"Parameter No. 1 - Activate / deactivate functions ALL ON / ALL OFF. \n" +
|
||||
"255 - ALL ON active, ALL OFF active,\n" +
|
||||
"0 - ALL ON is not active ALL OFF is not active,\n" +
|
||||
"1 - ALL ON is not active ALL OFF active,\n" +
|
||||
"2 - ALL ON active ALL OFF is not active.\n" +
|
||||
"Default value: 255."
|
||||
|
||||
input name: "param3", type: "number", range: "0..1", defaultValue: "0", required: true,
|
||||
title: "Parameter No. 3 - Auto off relay after specified time, with the possibility of manual override - immediate Off after button push. " +
|
||||
"Available settings:\n" +
|
||||
"0 - manual override disabled. After single button push the relay turns on and automatically turns off after specified time.,\n" +
|
||||
"1 - manual override enabled. After single button push the relay turns on and automatically turns off after specified time. Another button push turns the relay off immediately..\n" +
|
||||
"Default value: 0."
|
||||
|
||||
input name: "param4", type: "number", range: "0..65535", defaultValue: "0", required: true,
|
||||
title: "Parameter No. 4 - Auto off for relay 1. " +
|
||||
"Available settings:\n" +
|
||||
"[1 - 65535] (0,1 s – 6553,5 s) Time period for auto off, in miliseconds,\n" +
|
||||
"0 - Auto off disabled.\n" +
|
||||
"Default value: 0."
|
||||
|
||||
input name: "param5", type: "number", range: "0..65535", defaultValue: "0", required: true,
|
||||
title: "Parameter No. 5 - Auto off for relay 2. " +
|
||||
"Available settings:\n" +
|
||||
"[1 - 65535] (0,1 s – 6553,5 s) Time period for auto off, in miliseconds,\n" +
|
||||
"0 - Auto off disabled.\n" +
|
||||
"Default value: 0."
|
||||
|
||||
input name: "param6", type: "number", range: "0..2", defaultValue: "0", required: true,
|
||||
title: "Parameter No. 6 - Sending commands to control devices assigned to 1-st association group (key no. 1). " +
|
||||
"NOTE: Parameter 15 value must be set to 1 to work properly. This activates the double-click functionality - dimmer/roller shutter control.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 - commands are sent when device is turned on and off,\n" +
|
||||
"1 - commands are sent when device is turned off. Enabling device does not send control commands. Double-clicking key sends 'turn on' command, dimmers memorize the last saved state (e.g. 50% brightness),\n" +
|
||||
"2 - commands are sent when device is turned off. Enabling device does not send control commands. Double-clicking key sends 'turn on' command and dimmers are set to 100% brightness.\n" +
|
||||
"Default value: 0."
|
||||
|
||||
input name: "param7", type: "number", range: "0..2", defaultValue: "0", required: true,
|
||||
title: "Parameter No. 7 - Sending commands to control devices assigned to 2-st association group (key no. 2). " +
|
||||
"NOTE: Parameter 15 value must be set to 1 to work properly. This activates the double-click functionality - dimmer/roller shutter control.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 - commands are sent when device is turned on and off,\n" +
|
||||
"1 - commands are sent when device is turned off. Enabling device does not send control commands. Double-clicking key sends 'turn on' command, dimmers memorize the last saved state (e.g. 50% brightness),\n" +
|
||||
"2 - commands are sent when device is turned off. Enabling device does not send control commands. Double-clicking key sends 'turn on' command and dimmers are set to 100% brightness.\n" +
|
||||
"Default value: 0."
|
||||
|
||||
input name: "param13", type: "number", range: "0..1", defaultValue: "0", required: true,
|
||||
title: "Parameter No. 13 - Assigns bistable key status to the device. " +
|
||||
"Available settings:\n" +
|
||||
"0 - [On / Off] device changes status on key status change,\n" +
|
||||
"1 - Device status depends on key status: ON when the key is ON.\n" +
|
||||
"Default value: 0."
|
||||
|
||||
input name: "param14", type: "number", range: "0..1", defaultValue: "1", required: true,
|
||||
title: "Parameter No. 14 - Switch type connector, you may choose between momentary and toggle switches. " +
|
||||
"Available settings:\n" +
|
||||
"0 - momentary switch,\n" +
|
||||
"1 - toggle switch.\n" +
|
||||
"Default value: 1."
|
||||
|
||||
input name: "param15", type: "number", range: "0..1", defaultValue: "0", required: true,
|
||||
title: "Parameter No. 15 - Operation of the Dimmer and Roller Shutter Controller - enabling this option allows the user to dim lighting/shut roller by associating Dimmer/Roller Shutter Controller and holding or double press of double switch (only mono-stable switch). " +
|
||||
"Available settings:\n" +
|
||||
"0 - Dimmer/Roller Shutter Controller control is not active,\n" +
|
||||
"1 - Dimmer/Roller Shutter Controller control is active.\n" +
|
||||
"Default value: 0."
|
||||
|
||||
input name: "param16", type: "number", range: "0..1", defaultValue: "1", required: true,
|
||||
title: "Parameter No. 16 - Saving the state of the device after a power failure. Fibaro Switch returns to the last position saved before a power failure. " +
|
||||
"Available settings:\n" +
|
||||
"0 - Fibaro Switch does not save the state after a power failure, it returns to 'off' position,\n" +
|
||||
"1 - Fibaro Switch saves its state before power failure.\n" +
|
||||
"Default value: 1."
|
||||
|
||||
input name: "param30", type: "number", range: "0..3", defaultValue: "3", required: true,
|
||||
title: "Parameter No. 30 - General Alarm, set for relay no. 1. " +
|
||||
"Available settings:\n" +
|
||||
"0 - DEACTIVATION - the device does not respond to alarm data frames\n" +
|
||||
"1 - ALARM RELAY ON - the device turns on after detecting an alarm,\n" +
|
||||
"2- ALARM RELAY OFF - the device turns off after detecting an alarm,\n" +
|
||||
"3 - ALARM FLASHING - the device periodically changes its status to the opposite, when it detects an alarm within 10 min.\n" +
|
||||
"Default value: 3."
|
||||
|
||||
input name: "param31", type: "number", range: "0..3", defaultValue: "2", required: true,
|
||||
title: "Parameter No. 31 - Alarm of flooding with water, set for relay no. 1. " +
|
||||
"Available settings:\n" +
|
||||
"0 - DEACTIVATION - the device does not respond to alarm data frames\n" +
|
||||
"1 - ALARM RELAY ON - the device turns on after detecting an alarm,\n" +
|
||||
"2- ALARM RELAY OFF - the device turns off after detecting an alarm,\n" +
|
||||
"3 - ALARM FLASHING - the device periodically changes its status to the opposite, when it detects an alarm within 10 min.\n" +
|
||||
"Default value: 2."
|
||||
|
||||
input name: "param32", type: "number", range: "0..3", defaultValue: "3", required: true,
|
||||
title: "Parameter No. 32 - Smoke, CO, CO2 Alarm. Set for relay no. 1. " +
|
||||
"Available settings:\n" +
|
||||
"0 - DEACTIVATION - the device does not respond to alarm data frames\n" +
|
||||
"1 - ALARM RELAY ON - the device turns on after detecting an alarm,\n" +
|
||||
"2- ALARM RELAY OFF - the device turns off after detecting an alarm,\n" +
|
||||
"3 - ALARM FLASHING - the device periodically changes its status to the opposite, when it detects an alarm within 10 min.\n" +
|
||||
"Default value: 3."
|
||||
|
||||
input name: "param33", type: "number", range: "0..3", defaultValue: "1", required: true,
|
||||
title: "Parameter No. 33 - Temperature Alarm, set for relay no. 1. " +
|
||||
"Available settings:\n" +
|
||||
"0 - DEACTIVATION - the device does not respond to alarm data frames\n" +
|
||||
"1 - ALARM RELAY ON - the device turns on after detecting an alarm,\n" +
|
||||
"2- ALARM RELAY OFF - the device turns off after detecting an alarm,\n" +
|
||||
"3 - ALARM FLASHING - the device periodically changes its status to the opposite, when it detects an alarm within 10 min.\n" +
|
||||
"Default value: 1."
|
||||
|
||||
input name: "param40", type: "number", range: "0..3", defaultValue: "3", required: true,
|
||||
title: "Parameter No. 40 - General Alarm, set for relay no. 2. " +
|
||||
"Available settings:\n" +
|
||||
"0 - DEACTIVATION - the device does not respond to alarm data frames\n" +
|
||||
"1 - ALARM RELAY ON - the device turns on after detecting an alarm,\n" +
|
||||
"2- ALARM RELAY OFF - the device turns off after detecting an alarm,\n" +
|
||||
"3 - ALARM FLASHING - the device periodically changes its status to the opposite, when it detects an alarm within 10 min.\n" +
|
||||
"Default value: 3."
|
||||
|
||||
input name: "param41", type: "number", range: "0..3", defaultValue: "2", required: true,
|
||||
title: "Parameter No. 41 - Alarm of flooding with water, set for relay no. 2. " +
|
||||
"Available settings:\n" +
|
||||
"0 - DEACTIVATION - the device does not respond to alarm data frames\n" +
|
||||
"1 - ALARM RELAY ON - the device turns on after detecting an alarm,\n" +
|
||||
"2- ALARM RELAY OFF - the device turns off after detecting an alarm,\n" +
|
||||
"3 - ALARM FLASHING - the device periodically changes its status to the opposite, when it detects an alarm within 10 min.\n" +
|
||||
"Default value: 2."
|
||||
|
||||
input name: "param42", type: "number", range: "0..3", defaultValue: "3", required: true,
|
||||
title: "Parameter No. 42 - Smoke, CO, CO2 Alarm. Set for relay no. 2. " +
|
||||
"Available settings:\n" +
|
||||
"0 - DEACTIVATION - the device does not respond to alarm data frames\n" +
|
||||
"1 - ALARM RELAY ON - the device turns on after detecting an alarm,\n" +
|
||||
"2- ALARM RELAY OFF - the device turns off after detecting an alarm,\n" +
|
||||
"3 - ALARM FLASHING - the device periodically changes its status to the opposite, when it detects an alarm within 10 min.\n" +
|
||||
"Default value: 3."
|
||||
|
||||
input name: "param43", type: "number", range: "0..3", defaultValue: "1", required: true,
|
||||
title: "Parameter No. 43 - Temperature Alarm, set for relay no. 2. " +
|
||||
"Available settings:\n" +
|
||||
"0 - DEACTIVATION - the device does not respond to alarm data frames\n" +
|
||||
"1 - ALARM RELAY ON - the device turns on after detecting an alarm,\n" +
|
||||
"2- ALARM RELAY OFF - the device turns off after detecting an alarm,\n" +
|
||||
"3 - ALARM FLASHING - the device periodically changes its status to the opposite, when it detects an alarm within 10 min.\n" +
|
||||
"Default value: 1."
|
||||
|
||||
input name: "param39", type: "number", range: "0..65535", defaultValue: "600", required: true,
|
||||
title: "Parameter No. 39 - Active flashing alarm time. " +
|
||||
"This parameter allows to set time parameter used in timed modes.\n" +
|
||||
"Available settings:\n" +
|
||||
"[1-65535][ms].\n" +
|
||||
"Default value: 600."
|
||||
|
||||
/** input name: "paramAssociationGroup1", type: "bool", defaultValue: true, required: true,
|
||||
title: "The Fibaro Sigle Switch provides the association of three groups.\n\n" +
|
||||
"2nd group is assigned to key no. 1.\n" +
|
||||
"Default value: true"
|
||||
|
||||
input name: "paramAssociationGroup2", type: "bool", defaultValue: true, required: true,
|
||||
title: "2nd group is assigned to key no. 2.\n" +
|
||||
"Default value: true"
|
||||
|
||||
input name: "paramAssociationGroup3", type: "bool", defaultValue: false, required: true,
|
||||
title: "3rd group reports state of devices. Only one device can be associated to this group.\n" +
|
||||
"Default value: false"*/
|
||||
}
|
||||
}
|
||||
|
||||
def parse(String description) {
|
||||
def result = []
|
||||
def cmd = zwave.parse(description)
|
||||
if (cmd) {
|
||||
result += zwaveEvent(cmd)
|
||||
log.debug "Parsed ${cmd} to ${result.inspect()}"
|
||||
} else {
|
||||
log.debug "Non-parsed event: ${description}"
|
||||
}
|
||||
return result
|
||||
}
|
||||
|
||||
|
||||
def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
|
||||
sendEvent(name: "switch", value: cmd.value ? "on" : "off", type: "digital")
|
||||
def result = []
|
||||
result << zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:1, destinationEndPoint:1, commandClass:37, command:2).format()
|
||||
result << zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:1, destinationEndPoint:2, commandClass:37, command:2).format()
|
||||
response(delayBetween(result, 1000)) // returns the result of reponse()
|
||||
}
|
||||
|
||||
def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd)
|
||||
{
|
||||
sendEvent(name: "switch", value: cmd.value ? "on" : "off", type: "digital")
|
||||
def result = []
|
||||
result << zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:1, destinationEndPoint:1, commandClass:37, command:2).format()
|
||||
result << zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:1, destinationEndPoint:2, commandClass:37, command:2).format()
|
||||
response(delayBetween(result, 1000)) // returns the result of reponse()
|
||||
}
|
||||
|
||||
|
||||
def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCapabilityReport cmd)
|
||||
{
|
||||
log.debug "multichannelv3.MultiChannelCapabilityReport $cmd"
|
||||
if (cmd.endPoint == 2 ) {
|
||||
def currstate = device.currentState("switch2").getValue()
|
||||
if (currstate == "on")
|
||||
sendEvent(name: "switch2", value: "off", isStateChange: true, display: false)
|
||||
else if (currstate == "off")
|
||||
sendEvent(name: "switch2", value: "on", isStateChange: true, display: false)
|
||||
}
|
||||
else if (cmd.endPoint == 1 ) {
|
||||
def currstate = device.currentState("switch1").getValue()
|
||||
if (currstate == "on")
|
||||
sendEvent(name: "switch1", value: "off", isStateChange: true, display: false)
|
||||
else if (currstate == "off")
|
||||
sendEvent(name: "switch1", value: "on", isStateChange: true, display: false)
|
||||
}
|
||||
}
|
||||
|
||||
def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap cmd) {
|
||||
def map = [ name: "switch$cmd.sourceEndPoint" ]
|
||||
|
||||
switch(cmd.commandClass) {
|
||||
case 32:
|
||||
if (cmd.parameter == [0]) {
|
||||
map.value = "off"
|
||||
}
|
||||
if (cmd.parameter == [255]) {
|
||||
map.value = "on"
|
||||
}
|
||||
createEvent(map)
|
||||
break
|
||||
case 37:
|
||||
if (cmd.parameter == [0]) {
|
||||
map.value = "off"
|
||||
}
|
||||
if (cmd.parameter == [255]) {
|
||||
map.value = "on"
|
||||
}
|
||||
break
|
||||
}
|
||||
def events = [createEvent(map)]
|
||||
if (map.value == "on") {
|
||||
events += [createEvent([name: "switch", value: "on"])]
|
||||
} else {
|
||||
def allOff = true
|
||||
(1..2).each { n ->
|
||||
if (n != cmd.sourceEndPoint) {
|
||||
if (device.currentState("switch${n}").value != "off") allOff = false
|
||||
}
|
||||
}
|
||||
if (allOff) {
|
||||
events += [createEvent([name: "switch", value: "off"])]
|
||||
}
|
||||
}
|
||||
events
|
||||
}
|
||||
|
||||
def zwaveEvent(physicalgraph.zwave.Command cmd) {
|
||||
// This will capture any commands not handled by other instances of zwaveEvent
|
||||
// and is recommended for development so you can see every command the device sends
|
||||
return createEvent(descriptionText: "${device.displayName}: ${cmd}")
|
||||
}
|
||||
|
||||
def zwaveEvent(physicalgraph.zwave.commands.switchallv1.SwitchAllReport cmd) {
|
||||
log.debug "SwitchAllReport $cmd"
|
||||
}
|
||||
|
||||
def refresh() {
|
||||
def cmds = []
|
||||
cmds << zwave.manufacturerSpecificV2.manufacturerSpecificGet().format()
|
||||
cmds << zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:1, destinationEndPoint:1, commandClass:37, command:2).format()
|
||||
cmds << zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:1, destinationEndPoint:2, commandClass:37, command:2).format()
|
||||
delayBetween(cmds, 1000)
|
||||
}
|
||||
|
||||
def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
|
||||
def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
|
||||
log.debug "msr: $msr"
|
||||
updateDataValue("MSR", msr)
|
||||
}
|
||||
|
||||
def poll() {
|
||||
def cmds = []
|
||||
cmds << zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:1, destinationEndPoint:1, commandClass:37, command:2).format()
|
||||
cmds << zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:1, destinationEndPoint:2, commandClass:37, command:2).format()
|
||||
delayBetween(cmds, 1000)
|
||||
}
|
||||
|
||||
def configure() {
|
||||
log.debug "Executing 'configure'"
|
||||
delayBetween([
|
||||
zwave.configurationV1.configurationSet(parameterNumber:1, configurationValue:[param1.value]).format(),
|
||||
zwave.configurationV1.configurationSet(parameterNumber:3, configurationValue:[param3.value]).format(),
|
||||
zwave.configurationV1.configurationSet(parameterNumber:4, configurationValue:[param4.value]).format(),
|
||||
zwave.configurationV1.configurationSet(parameterNumber:5, configurationValue:[param5.value]).format(),
|
||||
zwave.configurationV1.configurationSet(parameterNumber:6, configurationValue:[param6.value]).format(),
|
||||
zwave.configurationV1.configurationSet(parameterNumber:7, configurationValue:[param7.value]).format(),
|
||||
zwave.configurationV1.configurationSet(parameterNumber:13, configurationValue:[param13.value]).format(),
|
||||
zwave.configurationV1.configurationSet(parameterNumber:14, configurationValue:[param14.value]).format(),
|
||||
zwave.configurationV1.configurationSet(parameterNumber:15, configurationValue:[param15.value]).format(),
|
||||
zwave.configurationV1.configurationSet(parameterNumber:16, configurationValue:[param16.value]).format(),
|
||||
zwave.configurationV1.configurationSet(parameterNumber:30, configurationValue:[param30.value]).format(),
|
||||
zwave.configurationV1.configurationSet(parameterNumber:31, configurationValue:[param31.value]).format(),
|
||||
zwave.configurationV1.configurationSet(parameterNumber:32, configurationValue:[param32.value]).format(),
|
||||
zwave.configurationV1.configurationSet(parameterNumber:33, configurationValue:[param33.value]).format(),
|
||||
zwave.configurationV1.configurationSet(parameterNumber:39, configurationValue:[param39.value]).format(),
|
||||
zwave.configurationV1.configurationSet(parameterNumber:40, configurationValue:[param40.value]).format(),
|
||||
zwave.configurationV1.configurationSet(parameterNumber:41, configurationValue:[param41.value]).format(),
|
||||
zwave.configurationV1.configurationSet(parameterNumber:42, configurationValue:[param42.value]).format(),
|
||||
zwave.configurationV1.configurationSet(parameterNumber:43, configurationValue:[param43.value]).format(),
|
||||
zwave.associationV2.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId]).format(),
|
||||
zwave.associationV2.associationSet(groupingIdentifier:2, nodeId:[zwaveHubNodeId]).format(),
|
||||
zwave.associationV2.associationSet(groupingIdentifier:3, nodeId:[zwaveHubNodeId]).format(),
|
||||
|
||||
])
|
||||
}
|
||||
|
||||
/**
|
||||
* Triggered when Done button is pushed on Preference Pane
|
||||
*/
|
||||
def updated()
|
||||
{
|
||||
log.debug "Preferences have been changed. Attempting configure()"
|
||||
def cmds = configure()
|
||||
response(cmds)
|
||||
}
|
||||
def on() {
|
||||
delayBetween([
|
||||
zwave.switchAllV1.switchAllOn().format(),
|
||||
zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:1, destinationEndPoint:1, commandClass:37, command:2).format(),
|
||||
zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:1, destinationEndPoint:2, commandClass:37, command:2).format()
|
||||
], 1000)
|
||||
}
|
||||
def off() {
|
||||
delayBetween([
|
||||
zwave.switchAllV1.switchAllOff().format(),
|
||||
zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:1, destinationEndPoint:1, commandClass:37, command:2).format(),
|
||||
zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:1, destinationEndPoint:2, commandClass:37, command:2).format()
|
||||
], 1000)
|
||||
}
|
||||
|
||||
def on1() {
|
||||
delayBetween([
|
||||
zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:1, destinationEndPoint:1, commandClass:37, command:1, parameter:[255]).format(),
|
||||
zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:1, destinationEndPoint:1, commandClass:37, command:2).format()
|
||||
], 1000)
|
||||
}
|
||||
|
||||
def off1() {
|
||||
delayBetween([
|
||||
zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:1, destinationEndPoint:1, commandClass:37, command:1, parameter:[0]).format(),
|
||||
zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:1, destinationEndPoint:1, commandClass:37, command:2).format()
|
||||
], 1000)
|
||||
}
|
||||
|
||||
def on2() {
|
||||
delayBetween([
|
||||
zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:2, destinationEndPoint:2, commandClass:37, command:1, parameter:[255]).format(),
|
||||
zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:2, destinationEndPoint:2, commandClass:37, command:2).format()
|
||||
], 1000)
|
||||
}
|
||||
|
||||
def off2() {
|
||||
delayBetween([
|
||||
zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:2, destinationEndPoint:2, commandClass:37, command:1, parameter:[0]).format(),
|
||||
zwave.multiChannelV3.multiChannelCmdEncap(sourceEndPoint:2, destinationEndPoint:2, commandClass:37, command:2).format()
|
||||
], 1000)
|
||||
}
|
||||
Reference in New Issue
Block a user